| ◇ GENERAL |
| |
|
| HQB Series Mixed Submersible Pumps
is the new updated production of conventional pump-electromotor
set, it 's provided with many excellence that conventional set
can not compare due to the electromotor dive and work together
with pump and be a whole. |
|
|
| ◇ MAIN USE AND CHARACTERISTICS |
 |
| |
| It is broadly used in transport water in agriculture, city
water supply, sewerage let and remove water project.。 |
- Because the pump operate dive in the water, this will
predigest the construction project of pumping station, reduce
the setting area, and will save 30%-40% of the total cost.
- Because the electromotor and pump be a whole, no need
to assemble the axletree and the centre, the mounting will
be shortcut and convenience.
- Because the pump operate in the water, so the yawp be
lower, and electromotor be cooling well.
- Simple operation, work trustiness, maintenance convenience
- Because the pump operate in the water, so it is suitable
for using in the Lakeland and near river lands where water
level fluctuate high.
- High efficiency, good prevent caustic.
|
| ◇ Description of model |
 |
 |
| ◇ Description of construction |
| |
HQB Series Mixed Submersible Pumps is one kind
of vertical pump, F pole insulated, the pump adopts mechanical
airproof of series-wound two path, also it has the protect equipment
to protect the leakiness and the temperature of the components
inside rise, it is equipped with control cabinet to ensure the
set operating safety.
The angle of HQB mix-flow dive pump's vane is adjustable, if
the work situation changes, the user can loose the vane and
fix the nut, remove the orientation, screw the vane, make the
base line aiming at the angle line, then mount the orientation
and screw the vane and nut down, before the pump leaving the
factory, if the user has no special demands, the mounted angles
of the vane are all 0 degree.
The body of the pump is constituted with infuse bugle, rotor,
mechanical seal etc.
Dive electromotor is composed with dry dive electromotor, alarm
equipment of prevent leakiness, measure temperature components,
control cable and power cable.
The electromotor of this pump should be clockwise circumrotated
when it be looked down. |
| |
(click
to enlarge) |
|
